SunSetter - PAR36 Landing Light

SUNSETTER LAND FRONT BACK AMAZON NO LOGO

GUARANTEED Drop-in replacement for all Halogen/Incandescent PAR 36 size lamps. The SunSetter LED Landing Light is engineered to be a drop-in replacement for ALL PAR 36 legacy lamps. Meets and even exceeds the brightness of 100-watt sealed beam bulbs but draws a mere 1.0amps @14VDC versus a staggering 7.5amps for the original. Free up valuable current for critical systems such as Communication/Navigation Equipment and electric Landing Gear and Flap motors. Our solid-state circuit design is immune to shock and vibration and engineered with a design life greater than 10,000 hours. So leave it on for all phases of flight to greatly increase daytime recognition and collision avoidance. Our SunSetter LED retrofit landing light is a no-brainer when the time comes to upgrade your landing light from the dinosaur age.   

Part #: PAR36L201

UPC: 713145670310 

 

Drop-in replacement for: GE4505, GE4509, GE4313, GE4591, GE4594, GE4595 GE4596, GE Q4631

Why Aero-Lites LEDs vs legacy sealed beams? 

Efficiency

Aero-Lites PAR 36 LEDs require less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current frees up valuable current for your critical Communication and Navigation instruments. FYI, the light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions (aka: taxi, approach and landing) your charging system may not be able to sustain the required 14 or 28 volts, so your sealed beams are producing much less than the spec'd light output. Our PAR 36 LED's produce the same stable light output at any voltage between 10-30VDC. 

 

Durability

Where Legacy sealed beams may last 100hrs in the most ideal situation, our PAR 36 replacements will likely outlive your aircraft with their average lifespan of 30,000 hours. It doesn't require a mathematician to see how quickly your investment in our LEDs will be realized. Since our LED are not affected by vibration, you will never again have the aggravation and expense of constantly replacing burned out lamps in your cowling-mounted landing light fixtures. 

 

Aircraft Recognition

Aero-Lites LED PAR 36 replacements are engineered with US engineered, industry-leading  CREE XP-E LED chips. We have selected LED chips with a color temperature of 6,000-6,500 kelvin. This color of light is consistent with that of the sun (imagine looking at the reflection of the Sun on an object like a mirror or glass). This intense brightness is hands-down many times easier to identify ESPECIALLY when it comes to air-to-air aircraft recognition which will lessen the risk of mid-air collisions, runway incursions and even  bird-strikes (birds have tremendous vision and will attempt to avoid aircraft should the see these intensely bright lights. 

Products                               Resources                Orders
Please reload

Please reload

Please reload

Copyright © 2016-2019 Aero-Lites, LLC. All Rights Reserved.